Month: October 2020

  1. Home
  2. 2020
  3. October
How to control pellet moisture with Underwater pelletizer?
October 18, 2020| Post by: Xindacorp

How to control pellet moisture with Underwater pelletizer?

In order to improve the quality of the finished product, some manufacturers have purchased underwater pelletizer, but found that the moisture content of the pellets still cannot come down. In the production of plastic pellets, the cutting systems are mainly: cold strand cutting, hot air die face cutting, water ring cutting and underwater cutting, etc. […]

The daily work of gravimetric feeder
October 18, 2020| Post by: Xindacorp

The daily work of gravimetric feeder

How does the gravimetric feeder complete the feeding process? There are many types of gravimetric feeder, including single screw gravimetric feeder, twin screw gravimetric feeder, and liquid gravimetric feeder. The feeding process can be divided into three steps: 1,When the gravimetric feeder is working, the material in its weighing hopper will gradually decrease with the […]

5 key points to keep the color masterbatch high speed mixing process correct
October 18, 2020| Post by: Xindacorp

5 key points to keep the color masterbatch high speed mixing process correct

High-speed mixing is to put pigments, dispersants, carriers, etc. into a high-speed mixer for high-speed mixing according to the designed formula. It is an extremely important first production link in the production of color masterbatches. Practical experience has proved that the pre-wetting of the pigment in the high-speed mixing process largely determines the final dispersibility […]

Pay attention to the safe production of extruder
October 14, 2020| Post by: Xindacorp

Pay attention to the safe production of extruder

As the main equipment of compounding production, extruder bears the brunt of its operation difficulty and danger. Today, we will sort out the little common sense that you need to keep in mind during the operation and debugging of the extruder, and start small to protect safe and efficient production. Before starting the extruder, check […]