Author: Xindacorp

  1. Home
  2. Xindacorp
XINDA Attended Chinaplas 2021
April 30, 2021| Post by: Xindacorp

XINDA Attended Chinaplas 2021

The four-day Chinaplas 2021 has ended successfully. Xinda exhibited the four-screw single-screw reciprocating extruder SKW-105 and the clam shell twin-screw extruder PSHJ-35 which both have excellent mixing performance. Four-screw single-screw reciprocating extruder SKW-105 Clam shell twin-screw extruder PSHJ-35 During the exhibition, many customers visited Xinda’s booth, gave a high evaluation of the Xinda compounding equipment, […]

The factors of underwater cutter damage and the solutions
March 28, 2021| Post by: Xindacorp

The factors of underwater cutter damage and the solutions

The factors of underwater cutter damage and improvement solutions are here! In actual production, the underwater pelletizing equipment is prone to cutter damage, resulting in unqualified pellets, which not only increases the cost of cutter replacement, but also may cause customer quality complaints and economic losses. Extending the service life of the cutter can not […]

Video Demo Show of Xinda Kneading Equipment
March 26, 2021| Post by: Xindacorp

Video Demo Show of Xinda Kneading Equipment

On March 26, 2021, Xinda demonstrated the full range of kneading extruders designed and produced by Xinda to customers at home and abroad in the form of video. This event shows the full range of SJW-45, 70, 100, 140, 200 three-flight reciprocating Co-Kneader, SKW-85, 105, 125 four-flight reciprocating Co-Kneader, as well as PSHJ-20, 35 , […]

Xinda training lecture on plastic polymers
March 13, 2021| Post by: Xindacorp

Xinda training lecture on plastic polymers

As a leading professional manufacturer of compounding equipment in China, in order to better improve product quality and serve Xinda`s customers. Xinda regularly organizes management and professional knowledge training for company employees. On the afternoon of March 10, 2021, the employees of the marketing department of Xinda Company participated in a training lecture on the […]

In 2020, Xinda achieves 30% total sales growth
January 13, 2021| Post by: Xindacorp

In 2020, Xinda achieves 30% total sales growth

n 2020, which has ended, despite the impact of the Covid-19, Xinda has achieved a 30% increase in total sales with the sincere cooperation of all employees. Total sales in 2020 will reach 67 million yuan. In the first week of 2021, Xinda has sold 6 sets of PSHJ-35 twin screw extruder, laying a good […]

How to control pellet moisture with Underwater pelletizer?
October 18, 2020| Post by: Xindacorp

How to control pellet moisture with Underwater pelletizer?

In order to improve the quality of the finished product, some manufacturers have purchased underwater pelletizer, but found that the moisture content of the pellets still cannot come down. In the production of plastic pellets, the cutting systems are mainly: cold strand cutting, hot air die face cutting, water ring cutting and underwater cutting, etc. […]

The daily work of gravimetric feeder
October 18, 2020| Post by: Xindacorp

The daily work of gravimetric feeder

How does the gravimetric feeder complete the feeding process? There are many types of gravimetric feeder, including single screw gravimetric feeder, twin screw gravimetric feeder, and liquid gravimetric feeder. The feeding process can be divided into three steps: 1,When the gravimetric feeder is working, the material in its weighing hopper will gradually decrease with the […]

5 key points to keep the color masterbatch high speed mixing process correct
October 18, 2020| Post by: Xindacorp

5 key points to keep the color masterbatch high speed mixing process correct

High-speed mixing is to put pigments, dispersants, carriers, etc. into a high-speed mixer for high-speed mixing according to the designed formula. It is an extremely important first production link in the production of color masterbatches. Practical experience has proved that the pre-wetting of the pigment in the high-speed mixing process largely determines the final dispersibility […]

Pay attention to the safe production of extruder
October 14, 2020| Post by: Xindacorp

Pay attention to the safe production of extruder

As the main equipment of compounding production, extruder bears the brunt of its operation difficulty and danger. Today, we will sort out the little common sense that you need to keep in mind during the operation and debugging of the extruder, and start small to protect safe and efficient production. Before starting the extruder, check […]

Xinda Co-Kneader: best choice for Semi-conductive Cable Compounds.
November 23, 2019| Post by: Xindacorp

Xinda Co-Kneader: best choice for Semi-conductive Cable Compounds.

Good news! Xinda Co-kneader has become the best choice for domestic manufacturers of Semi-conductive Cable Compounds. Following the order of Wanma Polymer with an annual output of 6,000 tons of shielded cable compounding equipment in May, this week we also won the tender of China’s leading company CGNPC 110KV shielded cable material project. Not only […]